Specifications

The standard G20 Head can be converted into a 24 or 25 gauge wire loop stitching head by

exchanging four complete sub-assemblies and adding a new Driver and Right Wire Guide Bar

included in the G20 Loop Stitch Kit. For further instructions and parts diagrams on Loop

Stitching, refer to page 46 in this manual.

G20KL (Figure 27)

The G20KSH Stop Stitch Kit is designed for use with the G20 Series Stitching Heads. It mounts

on the existing Stop Stitch Brackets of Harris Saddle Stitchers. The Stop Stitch Kit stops the feeding

of wire through the stitching heads by pushing open the Feed Release Handles (thereby stopping the

wire feed) when it receives a signal from the calipers of the Stitcher. It is available for standard 115V

Harris Saddle Stitchers as well as for 230V models by requesting part number G20KSH230.

G20KSH & G20KSH230

This kit is intended for use on McCain Stitchers using DeLuxe G20 Stitching Heads. The G20KSM

includes two Stop Stitch Shims and two Screws which assemble to the McCain Saddle Stitcher. This

Kit makes use of the components of the Saddle Stitcher itself and is easy to install.

G20KSM

The G20 Repair Kit is a collection of the most common replacement parts for the G20 Head

organized in a handy, see-through box. This Kit saves both time and money for the user of the

G20 Head.

G20RPK

Figure 27 - Loop Stitch Kit

G20700AA

G20527BA

G20714

G20547

G20301A

G20542B