Specifications

52
The G20 19x21 Conversion Kit allows existing
G20 Stitcher Heads to accommodate 19x21 gauge
flat wire. 19x21 gauge flat wire allows your
M19G20, M27G20 and other collating
systems to consistently stitch at a higher capacity
through thicker stock.
The parts included in this Kit have to only
replace their counterparts on the existing head.
Complete instructions are included with each
Conversion Kit.
G20K1921 (Figure 25)
The G20 Feed Lever Kit is intended for use on
Stitchers using DeLuxe Stitcher G20 Stitching
Heads. The G20KFL2 includes one Feed Lever Pin
Assembly, one Feed Lever E-Ring, one Feed Lever,
one Feed Lever Bearing, two Spirol Pins, two Shim
Washers and one Feed Lever Bearing Pin.
Since variations of the G20 Feed Gear were man-
ufactured in the past, the G20KFL2 was created to
ensure replacement parts are always compatible.
G20KFL2 (Figure 26)
The G20 Feed Gear Grease Kit assists in the regular cleaning and maintenance performed on the
G20 Stitcher Head and its component parts. See the Maintenance section, on page 21 of this
manual, for more information. Be sure to follow the instructions carefully and always use the correct
grease to repack the Gear.
G20KG
Figure 25 - 19x21 Conversion Kit
G20780 (2)
Figure 26 - Feed Lever Kit
7024B (2)
G20607BA
G20781
G20608B (2)
G20570 (2)
G20532B
G20540
G20262BA
G20580