Specifications

Each Head in the G20 Stitcher Head Series is basically identical with respect to
operation. The style variations in the Heads mentioned below, occur in some of the
component parts used for adaptation to single stitch or gang stitch machines. As model
design changes are made, part numbers also change.
These Heads were designed with a side-feed element to eliminate the need for a
Swivel and to increase their reliability. Well suited for all makes and models of
stitcher machines and collators, the G20-style Stitcher Head is user-friendly.
Typical Style Uses:
G20BHD..........................................................No. 19 and M19 Wire Stitchers
G20MHD ........................................................No. 27 and M27 Wire Stitchers
G20DHD, G20FHD, G20SHD ........................Automatic Saddle-Stitchers,
................................................................Gang-Stitchers, Multibinders and Others
Examples of Replacement Heads for OEM Users*:
AM Graphics ..........................................................G20DSHD, G20SHD
Bielomatic ..........................................................................G20DHD
ECH Will ..........................................................................G20DHD
Harris 242, 750, 855, 950 ......................................G20DSHD, G20SHD
Kugler ................................................................................G20DHD
McCain 1500, 2500XL, 3000XL ......................................G20SHD
Sheridan 705 ....................................................................G20SHD
* These are just a few examples of the replacement heads available for these OEM’s.
Introduction
4