Specifications

21
The following are some of
the more common wear parts
which will need to be
removed and replaced in your
G20 style Stitcher Head.
Some common replacement
parts do not require the
Stitcher Head to be removed
from the stitcher machine.
These parts will be addressed
first, then a more specific
explanation for
disassembling and replacing
wear parts for the G20
Stitcher Head will follow.
Removing and Replacing
the Wire Cutters
Figure 17
The Moving Wire Cutter
(G20145) has several
cutting surfaces, each of
which may be used by
rotating the Cutter’s position
on the Cutter Operating Slide
(G20598). Worn Cutters can
cause poor stitch quality. To
change or reverse the Moving
Wire Cutter, first remove the
In time, you will need to replace some parts in your G20 style Stitcher Head. When this happens,
first locate the needed part in one of the following diagrams. Then locate the DeLuxe Stitcher part
number and contact your Graphic Arts Representative to order the part by the part number,
description and quantity.
Ordering Spare Parts
!
Always power down the stitcher machine
before any maintenance or adjustments
are made to the stitcher head.
rCAUTION
!
Replacing Spare Parts (Figure 16)
Figure 16 - Replacing Spare Parts
G20597BA
G20551
G20536
G20547
G20583
G20559BA or
G20659BA
G20543 or
G20643