Installation Instructions

M618mini DB海外标准说明书
李世彬/190131
单色双面印刷
8
ON/OFF button
2.4G/Bluetooth switch button
8
800/1200/1600/2400
1.5V
30mA
Dual modes, 2.4GHz+Bluetooth 3.0
2.4G: Pressing the 2.4G/Bluetooth Switch button, the red light
lasting for 3 seconds means the current connection mode---2.4G.
Connecting the receiver to computer USB port, pressing the left
and middle button, the red light will flash when it is programmed
successfully.
1.When the Nano receiver is plugged into USB port,your computer
will detect the device automatically.
2.Then the mouse can work normally in ON mode.
Bluetooth: Pressing the 2.4G/Bluetooth Switch button, the Blue
light lasting for 3 seconds means the current connection
mode---Bluetooth 3.0.
Pressing the button for 2 seconds to enter Bluetooth programming
mode, meanwhile, the blue light will keep flashing. When it is
programmed successfully the light will be off.
If you want to build up the connection with a new device, just press
the 2.4G/Bluetooth switch button for 2 seconds and repeat the
above steps to connect new devices.
left
The indicator light will flash once after shifting the DPI to the first
grade, will flash twice after shifting the DPI to the second grade,
etc. 4 grades in total.
Breathing light: Pressing left, middle and right buttons at the same
time for 1 second to turn on/off the light.
Driver Instruction
1. Installation
2.Setting
These functions can be customized as below
3.Macro setting:
4.Other functions:
You can also adjust the speed of tracking , double-click and scrolling .
After setting the functions please click “Apply”, if you need default
functions just click “Restore Defaults” .
Basic: Cut, Copy, Paste, etc. 8 functions are available .
Advanced: Switch window, close window, etc. 6 functions are
available .
Media:Previous track, next track, stop, etc. 7 functions are available
Click “Assign Macro” to enter into Macro settings, click NEW and
name the macro, and click “Left click” on any blank space below
MACRO SELECT to confirm the name. Then Start Record, after
finishing the record, please click “STOP RECORD”, and click “OK”
to save the macro. After choosing certain macro, the background
of this macro will turn green, you can edit the macro.
1. 2.
3. 4. 5.
Download the driver from or the CD in the
package, install the driver.
Note: Please make sure this mouse is already connected to
computer when setting the functions in the driver.
for optional
AA Battery -----X1
Model：M618MINI DB