Datasheet

6
ProfiBus Anschluss-Stecker
ProfiBus Connectors
03 / 2018
ProfiBus Stecker PB 1.5 MBaud
EN 50 170; 9polig
ProfiBus connector PB 1.5 MBaud
EN 50 170; 9pole
Line D-Sub incoming outgoing
Pin-Belegung / Pin-out
Linie D-Sub Ankommend Abgehend
P Pin 3 B1 rot / red B2 rot / red
N Pin 8 A1 grün / green A2 grün / green
Designation P/N Version Function Housing
Bezeichnung P/N Ausführung Funktion Gehäuse
PB-B 1.5MB DE007964 x x x
DP PG Bus „End of Bus” Black Met.
PB-F 1.5MB DE004827 x x x
PB-MF 1.5MB DE005707 x x x
PB-MB 1.5MB DE007966 x x x
Technische Änderungen vorbehalten / Technical modification reserved
Technische Daten / Technical Data
Ausführung / Version
DP = Standard Ausführung
PG = Mit Programmiergeräte-Anschluss
DP = Standard version
PG = With programming device connection
Funktion / Function
Bus: Verbindungsstecker ohne zuschaltbaren
Abschlusswiderstand.
End of Bus: Verbindungsstecker mit Schalter (ON/OFF)
für zuschaltbaren Abschlusswiderstand.
Bus: Intermediary connector without switchable
resistor-network.
End of Bus: Connector with switchable resistor
network (ON/OFF).
Gehäuse / Housing
Kunststoff schwarz, metallisiert
Plastic black, metalized
Kabelabgang / Cable outlet
H=Horizontal / V=Vertikal (siehe Massskizze auf Seite 8)
H=horizontal / V=vertical (see dimension sketch on page 8)
Anschluss Bus-Leitung / Bus line connection
Klemmen, starr 0.14 bis 1.5 mm², flexibel 0.14 bis 1.00 mm²
Terminals, rigid 0.14 to 1.5 mm², flexible 0.14 to 1.00 mm²
Abmessungen / Dimensions
50x38x18.5 mm (LxBxH)
50x38x18.5 mm (LxWxH)
Temperaturbereich / Temperature range
-25°C bis +85°C
-25°C to +85°C
Induktivität / Inductor
Keine
None
A1 A2
Adaptor
50
"V"
Slit
off on
"H"
38
Connector Frame
open
40
18.5
B1 B2