User's Manual

Installationguidelines
56
Installing the DHR Repeater
Therepeatersunitsarefactoryconfiguredandshould notbeopenedinthefield.
Theremotesmustbemountedinaverticalposition.TherearetworecommendedmethodsforRemoteUnit
installation,wallmountingorpolemounting.Regardlessofthemountingstyleselected,theremotes mustbe
mountedsothatairflowovertheexternalheatsinkisnotobstructed.
Single Repeater Wall Mounting
Therepeatersareshippedwithstandardwallmountingbrackets.Thesebracketscanbeusedindoorsandoutdoors.
 Mountthebracketwithouttherepeaterattached.
Note: Alwayscheckloc
albuildingcodesforpropermountingtechniques.
 Oncethebracketisproperlymounted,therepeatereasilyslidesintothemount.See Figure48 .
Figure 48
Tighten Bolts
(4 places)
after Repeater
is Attached
Repeater Wall Mount
 Oncetherepeaterisattachedtothewallmount,therepeatermustbeproperlysecuredtothemountby
tighteningboltsateachmountingpoint.
WARNING
TheRep
eatersareheavy,usecareandalwaysproperlysupportunitsduringinstallation.Ifallowedtofalla
Repeatercancauseinjuryordeath.
CAUTION
EnsurethesurfacesbeingusedtomounttheRepeatercansafelysupportthefullweightoftheRepeater.