Owner`s manual

www.deltalabeffects.com
OPERATION
5
1. Input – Connect your instrument to input jack. The circuit is turned on
when a cable is inserted.
2. Rate – Adjusts the speed of modulation.
3. Depth – Adjusts depth (or amplitude) of modulation.
4. Level – Adjusts the amount of effect mixed with your “dry” signal.
5. True Bypass Switch – Engages and disengages the effect.
6. LED indicator – Indicator is on when effect is engaged. If LED is dim or
does not light when effect is engaged, replace the battery.
7. Out A (Mono) – Provides a single effected signal output.
8. Out B – Provides a second effected signal for stereo output with Out A.
9. External DC power jack – Plug an external 9 Volt wall adapter here.
When using an external adapter, the battery is switched off.