Owner`s manual

www.deltalabeffects.com

OPERATION

1. Input - Connect your instrument to input jack. The circuit is turned on

when a cable is inserted.

2. Time - Adjusts speed of echo repeats.

3. Repeats - Adjusts how many times the echoes are heard.

4. Level - Adjusts the amount of effect heard.

5. True Bypass Switch - Engages and disengages the effect.

6. LED indicator - Indicator is on when effect is engaged. If LED is dim or

does not light when effect is engaged, replace the battery.

7. Out A (Mono) - Provides a single effected signal output.

8. Out B - Provides a second effected signal for stereo output with Out A.

9. External DC power jack - Plug an external 9 Volt wall adapter here.

When using an external adapter, the battery is switched off.