Digital Delay DD1 Owner’s Manual
IMPORTANT SAFEGUARDS For your protection, please read these safety Instructions completely before operating the appliance, and keep this manual for future reference Carefully observe all warnings, precautions and instructions on the appliance and described in the operating instructions supplied with the appliance.
Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls and Connections. . . . . . . . . . . . . . . . 4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES Thank you for purchasing a DeltaLabTM DD1 Digital Delay Pedal! The DD1 Digital Delay creates echo effects from short slap-back to longer repeating echo. The DD1 adds echo effects to the sound of electric guitar and electronic keyboards.
SPECIFICATIONS Input Impedance 500K ohms Output Load Impedance >10K ohms Equivalent Input Noise -100dBm Power Supply One 9 Volt Battery or external 9VDC adapter Power Consumption 20mA Size 4.75 X 2.50 X 1.38 Weight 1.2lbs www.deltalabeffects.
CONTROLS AND CONNECTIONS 3 6 TIME 7 OUT A (MONO) 8 4 REPEATS OUT B DD1 5 Digital Delay 4 9 LEVEL INPUT 2 1
OPERATION 1. Input - Connect your instrument to input jack. The circuit is turned on when a cable is inserted. 2. Time - Adjusts speed of echo repeats. 3. Repeats - Adjusts how many times the echoes are heard. 4. Level - Adjusts the amount of effect heard. 5. True Bypass Switch - Engages and disengages the effect. 6. LED indicator - Indicator is on when effect is engaged. If LED is dim or does not light when effect is engaged, replace the battery. 7. Out A (Mono) - Provides a single effected signal output.
Notes 1. To avoid damage to electronics and speakers, always turn down the amplifier when connecting or disconnecting effects or an instrument. 2. Disconnect the battery when storing the unit for long periods of time. 3. A loss of delay signal will occur when the battery is running low. If so, replace the 9 Volt battery.
BATTERY REPLACEMENT 1. 2. 3. 4. Push the tab on the battery cover and lift. Carefully unplug battery. Replace battery with standard 9 Volt battery. Close cover. Unplugging cables from input of DD1 when not in use will turn the unit off and prolong battery life. www.deltalabeffects.
APPLICATION We recommend placing the DeltaLab Digital Delay before your amplifier and after other effects such as DeltaLab SC1 Stereo Chorus or RD1 Rock Distortion. Feel free to experiment with placement in the effects chain. Different placements will result in different tones.
warranty Five (5) Year Limited Warranty and Remedies Subject to the limitations below, DeltaLabTM warrants to the original owner that the components of this product are free from defects in workmanship and materials, subject to normal use and service, for five years from the date of purchase.
P.O. Box 5111 Thousand Oaks, CA 91359-5111 U.S.A. www.deltalabeffects.
