User Manual

ManualsBrandsDeltacom ManualsElectronicsPager Receiver

USER`S GUIDE MANUAL

Introduction

Congratulations on your purchase of a Mitsuki Infinite Plus Numeric

Display pager. This user’s guide explains how easy it is to use the

Mitsuki Infinite Plus pager.

1. Operating your Pager

Chain Ring LCD Display Mode button

Select button

2. Controls

A. Mode button

- Turn your pager on

- Turn the back light on/off

- Enter the function menu

- Delete and lock messages

- Return the pager to the standby screen

B. Select button

- Display messages

- Select pager functions

3. Function Indicators

Summary of content (9 pages)

PAGE 1
USER`S GUIDE MANUAL Introduction Congratulations on your purchase of a Mitsuki Infinite Plus Numeric Display pager. This user’s guide explains how easy it is to use the Mitsuki Infinite Plus pager. 1. Operating your Pager Chain Ring LCD Display Mode button Select button 2. Controls A.Mode button - Turn your pager on - Turn the back light on/off - Enter the function menu - Delete and lock messages - Return the pager to the standby screen B.
PAGE 2
Service Area Low Battery Alarm activated Audible Alert Duplicate Message Protected Message Continuous Message Vibrate Alert mode 4. Turning your Pager off 1) Press Mode button for 2 seconds on the standby screen and scroll the menu by Select button until “POWER OFF?” is displayed. 2) Press Select button for 2 seconds to turn your pager off. (power off mode) (power off) 5. Turning your Pager on Press Mode button for a second to turn your pager on.
PAGE 3
was received. 3) Press Mode button twice while reading your message to return to the standby screen. Message longer than 12 characters display on a second screen, indicated by the continuous message icon. Press Select button to display the second screen. The first screen of your message displays the message slot number and time received. If a message is not read, the pager gives a remainder alert every two minutes and the screen displays the number of unread messages (i.e.
PAGE 4
last two digits are identity-code. Identity-code indicates who pages you. Message-code s from 00 to 19. Identity-code is from 00 to 09. 1) Sending a pre-programmed messages. If your friend wants to send a pre-programmed message, he has to dial the pager number as he would normally do. And he has to press message-code(two digits) and his identity-code(two digits).
PAGE 5
10.Setting the Time 1) Press Mode button for two seconds to enter the function menu. 2) Press Select button to scroll the function menu until “TIME?” is displayed. 3) Press Select button for two seconds to set the day of thee week. The day blinks. 4) Press Select button to change the day. 5) Press Select button for two seconds to switch to the hour. The hour blink. As the same procedures, you can change the minutes and AM/PM. 6) Press Mode button twice to return to the standby screen. 11.
PAGE 6
1) Press Mode button for two seconds to enter the function menu. 2) Press Select button to scroll the function menu until “ALARM?” is displayed. 3) Press Select button for two seconds to set the alarm time. The ON/OFF blinks. 4) Press Select button to change the alarm on/off. 5) Press Select button for two seconds to switch to the alarm time. 6) Press Select button to change the alarm hour digit. 7) Press Select button for two seconds to switch to the alarm minutes.
PAGE 7
messages cannot be erased or overwritten by new messages when memory is full. You can protect up to four messages. 13. Erasing all messages 1) Press Mode button for two seconds at the standby screen. 2) Press Select button to scroll the function menu until “CLEAR ALL?” is displayed. 3) Press Select button for two seconds to erase all messages. The “SURE?” is displayed. 4) Press Select button for two seconds to erase all messages. The “NO MEMOS” is displayed.
PAGE 8
latest message. This message contains the latest time stamp. 3) Low battery indicator : When battery power reaches low levels, the low battery icon is displayed, prompting you to change the battery, your pager gives an alert or vibrate every two minutes. 4) Memory retention : All messages remain in memory, even when the player is off. 5) Message erase : Messages can be erased all at once or selectively at your choice to free space in memory.
PAGE 9
This device complies with Part 15 of FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CAUTION: Any changes of modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.