User's Manual

Right button Read/Select Button - Used to select a pager function, to read message,
to navigate through time/alarm/auto-power-on/off setting function.
4. Operation
Turning Your Pager On
Press and hold
READ
for three seconds. A start-up screen is displayed and your pager activates the
initial alert.
Turning Your Pager Off
Press
CURSOR
to move the cursor to , and press
READ
to display the Function menu.
Press
CURSOR
to move the cursor to .
Press
READ
to turn Pager off.
Your pager is now off and the screen is blank.
Backlight
Press
MODE
to move within the Main menu or
From the Message Manipulate Screen, select ‘ .
The Backlight is on at ST/BY mode by pressing MODE.
Using the Main Menu
1 Press
CURSOR
to move within the Main menu.
2 (Private, Maildrop, Diary and Function Mode)
3 Press
READ
to read message or enter the Function Menu.
Receiving/Reading/Manipulating Personal Messages
Your pager can receive up to 20 personal messages. When a message
is received, your pager alerts according to the current alert
setting (audible, vibrate, or silent).
-Reading an Incoming Message
1
When a Private message received, is changed to .
2
Press
READ
to display your message.
Press
READ
again to read the next screen.
3
Press
CURSOR
to go back to first screendf the message.
note
:
A on the st/by screen indicate a Full Memory.
-Preview/Reading/Backlighting/Locking/Unlocking/Deleting/Storing to Diary a Message
1
Press
CURSOR
to move the cursor to ,
2
Press
READ
to the display message preview screen, Press
CURSOR
to preview the message
you want to read.
3
Press
READ
to read the detailed message. Press
READ
again to read the next screen.
4
If you want to backlight/lock/unlock/delete or store-to-Diary the message while reading it,
press
MODE
to display Message Manipulate Screen.
5
Press
CURSOR
to move the cursor to the desired function, and press
READ
to activate it.