User's Manual

Note: Notebook messages are deleted one at a time. Storing to notebook is not activated when it is full.
Maildrop/Information Service
Your pager has eight Maildrop areas (Each area has four rooms for storing maildrop messages).
-Reading Messages in Your Maildrop
❶
From the Message Read Menu Screen, press#or! to move the cursor to .
❷
Maildrop messages are read the same way as personal messages.
-Turning Maildrop Alerts On and Off
❶
From the Function Menu Screen, press#or! to move the cursor to alert on
or alert off.
❷
Press to turn the maildrop alert on or off.
Setting the Incoming Message Alert
❶
From the Function Menu, press #or! to move the cursor to , or (current setting).
❷
Press to change the type of alert (audible, vibrate or silent).
Note: The current Alert setting ( , , ) is also displayed on the pager status line.
-Setting the Alert Pattern (Tone or Melody)
❶
From the Function Menu, press # to move the cursor to .
❷
Press to display the Select Melody screen.
❸
Press #or ! to move the cursor to desired number.
❹
Press to listen the melody or tone.
❺
Repeat steps 3 and 4 to select another pattern.
Setting the Time and Date
❶
From the Function Menu, press! to move the cursor to .
❷
Press to display the Set Time/Date screen.
❸
Press #or ! to adjust the hour.
❹
Press to move the cursor to next set of digits.
❺
Repeat steps 3 and 4 to adjust minutes, day/month(or month/day)/year/week.
❻
Press " to activate the time and date setting.
Setting the Alarm
❶
From the Function Menu, press! to move the cursor to or .
❷
Press to display the Set Alarm screen.
❸
Press #or ! to enable or disable alarm.
❹
Press to move the cursor to alarm hour.
❺
Press #or ! to adjust the hour.
❻
Repeat for minutes.
❼
Press " to activate the alarm setting.
Note: If alarm is on, the symbol is displayed on the pager status line.
Setting the Auto Power On/Off
❶
From the Function Menu, press! to move the cursor to or .
❷
Press to display the Set Auto Power On/Off screen.
❸
Press #or ! to enable or disable auto-power-on/off.
❹
Press to move the cursor to auto-off hour digits.
❺
Press #or ! to adjust the hour of auto-off time.
❻
Repeat steps 4 and 5 to adjust the minutes and auto-on time .
❼
Press " to activate the auto-power-on/off setting.