Technical data

ManualsBrandsDelta ManualsPlanerThree Phase 1342457 06-03-05

161

162

163

164

165

166

167

168

169

170

Table Of Contents

June 2005

160

For more information visit: www.EatonElectrical.ca CAT.02.02.S.K.CD

XT IEC Power Control

Combination Motor Controllers

Product Family Overview

Standards and Certiﬁcations

UL 508 Type F Combination Motor

Controller

■ IEC Type 2 Approved per

IEC 60947-4-1

■ UL Listed File No. E218618

■ CE Mark

Protection in Different Controller

Types

A UL 508 Type E Self-protected Manual

Combination Starter/Motor Controller

consists of a single device having inte-

gral short circuit protection, a main set

of contacts, motor overload protec-

tion, and may also include a UL listed

Line Side Adapter (See Table 209). This

type of controller is a legitimate short

circuit protective device and discon-

nect means for the downstream motor.

It does require an upstream feeder

short circuit protective device, but

does not require a dedicated branch

circuit protection or a disconnect

means if used with a Line Side

Adapter. A UL 508 Type E rating means

that the unit clears a fault and does not

experience any welding of the power

poles. A UL 508 Type E self-protected

manual motor controller will remain

fully functional should a short circuit

within its ratings occur. E.g. XTPR.

An XT UL 508 Type F Self-protected

Combination Motor Controller consists

of a UL Listed Type E Self-protected

Manual Combination Starter/Motor

Controller, a UL Listed Contactor, and

a UL Listed Line Side Adapter (See

Table 209). While the UL 508 Type E

self-protected manual motor controller

of this combination motor controller

device is a legitimate short circuit

protective device and disconnect

means for the downstream motor,

the contactor is not “self-protected.”

E.g. XTFC, XTFR.

In addition, as a complete assembly or

modular components, the device

should have Type 2 Coordination certi-

ﬁcation. Type 2 Coordination means

the Starter or the Controller must

exhibit little or no damage following a

major short circuit fault and should be

able to be returned to proper service

without replacing any parts.

Table 209. MMC and CMC Applications



SCPD = Short Circuit Protective Device (Circuit Breaker, Fuses).



MMC = Manual Motor Controller

Reference: Technical Paper AP03402001E.

Note: Line Side Adapters are not required for non-U.S. applications. Most countries outside

of the U.S. classify the MMP as a thermal magnetic circuit breaker.

Accessories

Line Side Adapters

Line Side Adapters are required for use with XTPR MMPs only when used as Type E

Self-Protected Manual Combination Starters or as part of XTFC or XTFR Type F

Combination Motor Controllers. Not required for Group Installation.

Table 210. Line Side Adapters

Combination Connection Kits

Combination Connection Kits include the necessary components to ﬁeld assemble

a Manual Motor Controller with an MMP (XTPR) and Contactor (XTCE).

Table 211. Combination Connection Kits



Contact Eaton.

XT IEC Manual & Combination Motor Controllers

Line Side Adapter (LSA)

Not required

Manual Motor Controller

XTSC / XTSR

Group Installation

Using the in-panel Main

SCPD



and an MMC



without a factory

assembled LSA.

UL 508 Type F Combination Motor Controller

Only Upstream Feeder SCPD



required with factory

assembled LSA; no dedicated in-panel Main SCPD



for CMC.

Line Side Adapter (LSA)

Required — Factory

Assembled

Combination Motor Controller

XTFC / XTFR

Description Catalog

Number

Price

For use with Frame B MMPs (up to 32A) XTPAXLSA

For use with Frame D MMPs (up to 40A) XTPAXLSAD

Description Catalog

Number

Price

Non-reversing