Specification Sheet

ManualsBrandsDelta ManualsMixing ValvesCommercial Single-Handle 2-Spray Tub and Shower Faucet in Chrome (Valve Not Included)

Delta reserves the right (1) to make changes in speciﬁ cations and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for ﬁ nish options and product availability.

MultiChoice

Universal

Pressure Balance Tub and Shower

See DSP-B-R10000-HDF for additional Rough-In options. Note: Use this page front and back as a product submittal sheet.

1) Valve rated minimum 1.25 gpm @ 45 psi (4.7 L/min @ 310 kPa). Refer to www.specselect.com for individual models.

DSP–T13H1 Rev. K Page 2.C.3

Engineer/Architect Approval

Model Speciﬁ ed:

Approval: Date:

PRODUCT VARIATION

SHOWER

4 4 4

HANDLE

TUB AND SHOWER DESCRIPTION PRODUCT NO.

ROUGH-IN Valve R10000-UNWS

FINISH TRIM Only T13H

Speciﬁ cation: (example)

R10000-UNWS ROUGH-IN only

• Concealed in-wall MultiChoice

Universal valve

• Back-to-back capability, Integral screwdriver stops

• Heavy Duty forged brass valve body

• 1/2" Universal inlets to accept 1/2" copper,

1/2" iron pipe, PEX or CPVC adaptors

• 1/2" Male thread inlets/outlets

• Inwall diverter valve

o T13H _ _ _ - _ _ _ FINISH TRIM ONLY:

• Pressure balancing cartridge with checks

• Polished chrome plated finish

• ADA compliant handle

• Non-removeable red/blue temperature markings

and … with … (add product variation)

with … (add shower)

with … (add valve handle)

T13H153 T13H162

Specify “0”

When No Shower

Outlet Required

(1)

Shower Valve Only

Tub and Shower

3-Function Touch-Clean

Showerhead, Arm,

Set Screw Flange

Showerhead, Arm,

Set Screw Flange

Handshower with

2 Check Valves,

610mm (24") S/S Bar

with ADA Slide

30° Vandal Resistant

Cast Wallmount Showerhead

57mm (2.24")

Vandal Resistant

Lever Blade Handle

85mm (3.33")

Vandal Resistant

Metal Lever Handle

Okinetic Technology

Showerhead, Arm,

Set Screw Flange

Engineer/Architect Approval

Model Speciﬁ ed:

Approval: Date:

DSP–T13H1 Rev. K

Summary of content (3 pages)

PAGE 1
MultiChoice Universal Pressure Balance Tub and Shower ® Speciﬁcation: (example) o R10000-UNWS ROUGH-IN only T13H153 T13H162 Concealed in-wall MultiChoice® Universal valve Back-to-back capability, Integral screwdriver stops Heavy Duty forged brass valve body 1/2" Universal inlets to accept 1/2" copper, 1/2" iron pipe, PEX or CPVC adaptors • 1/2" Male thread inlets/outlets • Inwall diverter valve o T13H _ _ _ - _ _ _ FINISH TRIM ONLY: • Pressure balancing cartridge with checks • Polished chrome plated fin
PAGE 2
MultiChoice Universal Pressure Balance Tub and Shower ® Approvals: • ASME A112.18.1/CSA B125.1 • R10000-UNWS Rough-In with T13H132 Trim I ndicates compliance to ICC/ANSI A117.1 • Pressure Balance Valve complies with ASSE 1016 • Handshower back flow protection provided by two integral certified check valves in series, which operate independently, ASME A112.18.3 FRONT VIEW SIDE VIEW 70 mm (2.75”) ( Contact Delta Representative for State and/or Local Approvals.
PAGE 3
T13H Series Tub and Shower Add-On Options DESCRIPTION ADD-ON NUMBER – T13H Tub/Shower Add-On Options HOSE A number from the Hose and Slide Bar columns must always be selected, even if it is “0”.