User manual
Table Of Contents
- N
- Introduction
- Introduction
- Getting Started
- S
- SunScan Tutorial
- M
- Menus and Screens
- More Psion and file handling notes
- M
- Measurement options
- L
- LAI theory
- Technical Reference section
- Maintenance and repair
- Troubleshooting
- Psion Workabout
- Problems running the SunData application.
- While running SunData
- SunData reports “SunScan probe not connected”.
- SunData recognises the SunScan probe, but fails to take readings.
- On running SunData, all the system settings are scrambled.
- “Out of memory” reported on drive A:.
- “Insufficient power to write data” reported.
- When transferring files to a PC, data is transferred, but there are repeated checksum or device IO errors.
- SunScan or BFS give inconsistent light readings.
- Technical Support
- Specifications
- PAR Performance
- Appendices
- Index
SunScan User Manual v 1.05 SunScan Tutorial •
••
• 29
SunData Screens on the Workabout
Note: these screens
are only required if you
are measuring Leaf
Area Index (LAI), and
you do not have a
Beam Fraction sensor
attached to the probe.
Note: screen display and data stored
will be different from this if the Menu,
Settings, Display option is set to
either PAR or All instead of LAI.