User manual

Chapter 4 Installation Information| CME-PD01

4-2 Revision October 2006, 2006PDD23000013



Power Supply

The power of CME-PD01 is supplied from VFD-E series Drive. The VFD-E firmware

version should be V2.02 and above. No external power needed. The +15VDC power is

applied to CME-PD01 directly via a specific 6-PIN communication cable (This 6-PIN

cable is packed together with CME-PD01).



CME-PD01 is energized while the power is applied to the VFD-E series, then the SP

LED will be steady green.

4.2 Pin Assignment of PROFIBUS-DP Interface (DB9)

Use PROFIBUS-DP interface (DB9) of CME-PD01 connecting CME-PD01 to PROFIBUS DP

system. The terminals are short-circuit-proof and isolated.

Pin Designation Description

1 -

Not assigned

2 -

Not assigned

3 Rxd/TxD-P

Receive/send data P (B)

4 - Not assigned

5 DGND

Data reference potential (C)

6 VP

Supply voltage positive

7 -

Not assigned

8 RxD/TxD-N

Receive/send data N (A)

9 -

Not assigned