Technical Specifications

Lyndall
TM
TOILET PAPER HOLDER
TECHNICAL DATA
MATERIALS: Post - Zinc die cast
Bar - Zinc die cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied fasteners. Slip
product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER
INFORMATION: Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the
following fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall
- Toggle Bolts.
SPECIFICATION: Surface mounted toilet paper holder shall be model _____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
QuickClick
3-1/3”
[84.2 mm]
2-1/4”
[57 mm]
7”
[178.5 mm]