Industrial PC IPC-B200-J923E1C00 User manual version：Ver.
Disclaimer This manual is only for Delta Electronics, Inc, no copyright without permission .the contents of this manual are not representative of the manufacture’s commitment ,due to the continuous improvement of products, we reserve the right to change the manual, please forgive that if no information in advance. In no event will the manufacture be liable for direct. indirect. Special .incidental or consequential damages. arising out of improper installation or use.
Safety Instructions • Please read the user manual carefully before using the product, and carefully keep it for future reference. • Before connecting power supply to the product, please confirm the voltage is compliant with the requirement of the device. • To avoid electric shock or damage to the product, please unplug the power cord from the socket before cleaning the device by wet rag. • Please do not use liquid or aerosol cleaner to clean up the device.
Packing List • A fanless industrial Computer • 1*AC 100V～240V to DC+12V/5A power adapter • 1*AC220V power cable • 2*Mounting Bracket & 4*Screw • 1*Driver CD & manual • 1*Certification,1*packing list
Content 1．Product Introduction ......................................................................... 1 1.1 Brief introduction ........................................................................................ 1 1.2 Product specifications ................................................................................ 1 1.3 I/O ................................................................................................................. 3 2．Application planning .................................
5.2.3 On board sound card driver installation .................................... 16 5.2.4 On board network card driver installation ................................. 16 5.3 Trouble & Trouble shooting .....................................................................
1．Product Introduction 1.1 Brief introduction IPC-B200-9X3E1X00 is a low-power-consumption, high-performance and fanless embedded industrial computer, with material of high-strength and elegant al-alloy and the high-density al-alloy radiator. This product has low power consumption Intel Baytrail J1900 on board, 4GB DDR3L RAM，max to 8GB (optional), and it has rich I/O interfaces and fully-sealed fanless design, supporting Windows 7/ 8.1/10 Linux and so on.
ance structure weight Temp Material: high-strength Al-alloy heat dissipating plate color：black Heat dissipation：fanless design 720g Operationg temp:-10°C ～ 50°C Storage temp:-20°C ～ 60°C 90% @ 40°C（non-condensing） Humidity EMC Reliability safety Mechanic environment compatibility Limit of radio disturbance meets GB9254-1998 standard Class A Immunity meets the limits of GB/T 17618-1998 standard MTBF≥25000h MTTR≤0.
1.
2．Application planning 2.1 Transportation Well-packaged products are suited for transportation by truck, ship, and plane. During transportation, products should not be put in open cabin or carriage. During transshipping, products should not be stored in open air without protection from the atmospheric conditions. Products should not be transported together with inflammable, explosive and corrosive substances and are not allowed to be exposed to rain, snow and liquid substances and mechanical force. 2.
● When you check the delivered equipment, please check whether it is obviously damaged during the transportation. ● Please check whether the delivered parcel includes the whole equipment and the accessories you ordered separately. If there is any discrepancy or damaged during transportation, please contact our customer-service staff.
3．Installation instructions 3.1 Product outline Picture 3-1 3.2 Product assembly Picture 3-2 1. on-off 2. front panel 3. motherboard 4. radiator 5. baseboard 6. installation support 7. harddisk support 8. COM 9. backplate 10. DC in-put 11.
4．Interface Definition 4.1 USB port There are 2 USB2.0 and 4 USB 3.0 on this product,following is the pin definition: USB2.0 Definition 1 +5V 2 USB Data- 3 USB Data+ 4 GND USB1~2 USB3~6 USB3.
4.2 Ethernet There are 2 Ethernet 1000M on this product,following is the pin definition: LAN1,LAN2 LILED ACTLED (Green light) Twinkle Light off netstat （green/orange） Netstat With data transmission No data transmission green 1000Mbps orange 100Mbps Light off 10Mbps 4.
VGA pin definition pin definition 1 Red 2 Green 3 Blue 4 N.C. 5 GND 6 Detect 7 GND 8 GND 9 +5V 10 GND 11 NC 12 DDCDATA 13 HSYNC 14 VSYNC 4.5 Standard HDMI A Type pin HDMI definition definition pin 1 DATA2+ 2 DATA2 shield 3 DATA2- 4 DATA1+ 5 DATA1 shield 6 DATA1- 7 DATA0+ 8 DATA0 shield 9 DATA0- 10 DATA1_CK+ 11 DATA1_CK 12 DATA1_CK- 13 CEC shield SCL（DDC 14 Reserved 16 SDA（DDC data） DCC/CEC GND clock） Hot swap test 18 +5V 15 17 19 / 4.
5. Appendix 5.1 Host BIOS settings 5.1.1 Main Press F2 to boot, go into BIOS →CMOS, setting date and time as shown in picture 5-1： Picture 5-1 5.1.
Picture 5-3 In “LCD Panel Type” options, you can change panel pc’ s original resolution, if the resolution you choose is uncompatible with screen’ s real resolution, may lead to unnormal showing. In page of picture 5-4, choose ”AC power Loss Setting” to enter “Restore AC Power Loss” : 【Power off】Press switch to boot after power on， 【Power on】Auto boot after power on， 【Last Status】After power on, if illegal shutdown last time, the pc will return last status ,if normal shutdown, pc will be in power on status.
Picture 5-5 5.1.
5.1.4 Chipset Here you can set I/O port,system memory,graphics memory,as shown in picture 5-7: Picture 5-7 5.1.5 Boot The menu can set Num Lock’ s status when booting, or set storage’ s boot program ， firstly, choose first boot device in “Hard Drive BBS Priorities”,，then choose it in “Boot Option #1”,press F4 to save and exit. choose “Hard Drive BBS Priorities” to enter, as shown in picture 5-8.
Enter “Hard Drive BBS Priorities”, choose first boot device in “Boot Option #1”,as shown in 5-9: Picture 5-9 After last step, press “ESC” to return to last page，choose first boot decvice in “Boot Option #1”again,as shown in picture 5-10,preess “F4” to save, press “enter” to exit. Picture 5-10 5.1.6 Security This menu is used to set password to enter BIOS Setup and boot.
Picture 5-11 5.1.7 Save & Exit Enter CMOS page，choose "Save & Exit" , as shown in picture 5 -12 ： Picture 5-12 Press“F3”to recover factory reset,press“F4”to save.
5.2 Driver software installation 5.2.1 Chipset driver installation (1) Enter “Driver\Chipset\”, double click “Intel _inf.exe”. (2) Follow notice, click “next step” and “continue”. (3) After installation, choose “Yes” and “finish” in “restart”, the driver software would auto load after restart . 5.2.2 On board graphics card driver installation (1) Enter driver CD “Driver\ Graphic\ ”，choose related OS files. double click “setup. exe” with left key. (2) Follow notice, click “next step” and “continue”.
5.3 Trouble & Trouble shooting Common Malfunction The device is not operating The external display is black Possible Reasons Trouble shooting and solution No power supply Please check the power supply and the power cable/connector Improper device operating environment 1. Check the environment conditions 2. Please wait for 12 hours before powering on the device shipped in cold day.
Common Malfunction Possible Reasons Trouble shooting and solution Boot device not found In booting priority of the BIOS setting, the device is not the first priority or the device is not include in the booting device Modify the booting priority of the device in the Boot menu of BIOS setting or include that device into the booting priority The HDD power cable or data cable is not connected well Check whether the power cable and the data cable of the hard disk(the hard disk shall be installed with oper
FCC: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
