Operation Manual

11
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
E-MAIL SUPPORT [e-mail]
Model Number: GT-WKe-01UK
After boiling:
X Press the KEEP WARM button as soon as the signal tone sounds at the end of the
boiling process.
The appliance will automatically select the temperature to which you have heated the
water as the keep-warm temperature.
The LED of the relevant temperature, the KEEP WARM and on/off button will
illuminate.
The water will be kept warm.
Dry-run protection
A dry-run protection safeguards the appliance from damage. The protection switches on
automatically if no more liquid is in the kettle.
The dry-run protection should only be used as a safety device. It is not intended
to be part of the normal operating procedure for the appliance.
If the dry-run protection has been activated:
1. Disconnect the power plug from the socket.
2. Allow the kettle to cool off.
Then, you can fill the kettle with water again and use it as usual.
Cleaning + descaling
Cleaning
HAZARD
- The base, kettle and power cable must not be immersed in water or other
liquids. Electrical shock hazard!
- Remove the plug from the socket before cleaning the appliance.
- Allow the appliance to cool off completely before cleaning it. Burn hazard!
CAUTION
Do not open the lid during boiling and pouring. Risk of scalding from hot water
vapour!
1. Remove the plug from the socket and allow the kettle to cool off completely.
Wipe the outside of the kettle clean with a slightly damp cloth.
2. Clean the base with a dry cloth.
3. Open the lid and remove the sieve that is fastened in front of the spout. For this, press
the sieve down slightly and then fold it off.
The sieve prevents limescale deposits and dirt particles from being poured out.