Instruction manual

FLEXIBLE LAMP (GR150 ONLY)

The flexible lamp operates independently of the grinder.

To turn the lamp on and off, rotate switch (A) Fig. 11.

WARNING: To reduce the risk of fire, use 40 watt or less,

120 volt, reflector track type light bulb (not supplied). A

standard household light bulb should not be used. The

reflector track type light bulb should not extend below

the lamp shade.

Fig. 11

Keep the spark guards and eye shields in

place at all times.

Figures 12, 13, and 14 illustrate several typical

operations that can be accomplished using the grinder.

Each tool rest should be positioned a little below the

center of the grinding wheel and adjusted so that the

edge of the tool rest is a distance of 1/8” or less from the

wheel. This will provide maximum support to the

workpiece and is the safest position for general work.

As the grinding wheel wears down, readjust the tool rest

closer to the grinding wheel. Always maintain a distance

of 1/8" or less between the grinding wheel and the edge

of the tool rest. Free hand grinding (without the use of the

tool rest) should always be done on the lower quarter of

the grinding wheel. Read and follow all of the safety

rules in this manual.

Fig. 12

Fig. 13

Fig. 14

MACHINE USE