Specifications

39
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Dust Collection Accessories
Use in conjunction with our 4" blast gate; open
gate and sweep dust in. Attach to floor with dou-
ble sided tape or duct tape. ABS plastic.
$ .79
$ .89
$ .99
$ 1.09
Aluminum Blast Gates
Floor Sweep
$ 9.95
$ 5.49
#W1003
Blast Gates
#W1021
#W1022
#W1023
#W1024
3”
4”
5”
6”
Steel Band Hose Clamps
$ .89
$ .95
$ 1.29
#W1316
#W1317
#W1318
3”
4”
5"
Wire Hose Clamps
Wye Branch
Reducers
Splice Fitting
T-Fitting
Elbow Fitting
Fits over a 3" hole and is easily
attached with double sided tape
or screws. Outlet diameter is 2-
1/2" so it will fit most home shop
vacuums.
Universal Dust Port
#W1042
Our flexible dust collector hoses are specifically
designed for your dust collection needs (2-1/2"
hose is the standard diameter for shop vacs).
#W1026
#W1027
#W1028
#W1031
#W2031
#W1032
#W1033
Plastic Dust
Collector
Hose
2”Diameter x 10’
2-1/2" Diameter x 10'
3" Diameter x 10'
4" Diameter x 10'
4" Diameter x 10' CLEAR
4" Diameter x 20'
5" Diameter x 10'
$ 10.95
$ 12.95
$ 13.95
$ 14.95
$ 14.95
$ 27.95
$ 23.95
Natural Rubber-
Wire Reinforced
Dust Collector
Hose
$ 5.95
Seven-step adapter pro-
vides a multitude of dust
collection reducing
options. Simply cut
away unneeded steps
with a hacksaw. Outside
diameter step sizes
include 1”, 2”, 2-1/2”,
3”, 4”, 5”, and 6”.
4” inside diameter on one
side and 4” outside diam-
eter on the other to quickly
provide an airtight fit.
4” Plastic Quick Disconnect
#W1038
$ 4.95
Universal Adapter
#W1039
Hose Adapters
Step Adapter
#39335 $ 8.16
For increasing 1-1/2”
hose to 2-1/2”
#39342 $ 21.00
Threaded end fits 1-1/2”
OD hose with adapter
steps of 7/8” ID, 1-1/16”
ID, and 1-3/16” ID
#39341 $ 13.61
Threaded end fits 1-1/2” OD
hose with step-down adapter
(1” ID / 1-5/16” OD)
#921072K13 $ 3.10
Step adapter steps down
three times from 1-3/8”
ID to 7/8” ID.
Vacuum Hose
10’ - attaches to
standard 1-1/2”
shop vac line
Used to connect full sec-
tions of hose for longer runs
or to utilize short sections.
#39332 $ 25.00
A blast gate enables
you to maximize your
dust collection system
efficiency by allowing
you to control air flow
from one machine to
another. Available
both in plastic and
aluminum.
Our premium quality dust collector hose is man-
ufactured from natural rubber and wire rein-
forced. Sold in 5' increments. Priced per foot.
#W1141
#W1142
$ 10.95
$ 12.95
3” Outlet . . . . . . . . . . .
4” Outlet . . . . . . . . . . .
Plastic Blast Gates
#W1006
#W1007
#W1008
#W1009
$ 5.49
$ 6.49
$ 7.95
$ 9.95
3” Outlet . . . . . . . . . . . .
4” Outlet . . . . . . . . . . . .
5” Outlet . . . . . . . . . . . .
6” Outlet . . . . . . . . . . . .
#W1018
#W1019
$ 3.95
$ 4.95
3” Splice fitting . . . . . . .
4” Splice fitting . . . . . . .
#W1014
#W1015
$ 4.95
$ 6.95
3” Wye branch . . . . . . . .
4” Wye branch . . . . . . . .
#W1012
#W1013
$ 4.95
$ 6.95
3” T-Fitting . . . . . . . . . .
4” T-Fitting . . . . . . . . . .
#W1016
#W1017
$ 4.95
$ 6.95
3” Elbow fitting . . . . . . .
4” Elbow fitting . . . . . . .
#FH-2
#FH-2.5
#FH-3
#FH-4
#FH-5
#FH-6
$ 4.65/ft
$ 5.25/ft
$ 6.46/ft
$ 6.70/ft
$ 8.48/ft
$ 10.34/ft
2” diameter . . . . . . . .
2-1/2” diameter . . . .
3” diameter . . . . . . . .
4” diameter . . . . . . . .
5” diameter . . . . . . . .
6” diameter . . . . . . . .
#W1020
#W1041
#50-482
#W1044
#W1011
#W1037
$ 3.95
$ 4.95
$ 5.50
$ 5.49
$ 3.95
$ 3.95
3” to 2” reducer . . . . . . . . .
3” to 2-1/2” reducer . . . . . .
4” to 2-1/4” reducer . . . . . .
4” to 2-1/2” reducer . . . . . .
4” to 3” reducer . . . . . . . . .
5” to 4” reducer . . . . . . . . .