Specifications

25
Jointers & Accessories
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Shop Fox 8” Jointer
• 2 HP, 1 phase, 220V motor
• Table size: 9-1/4" x 70"
• Cutterhead diameter: 3"
• Knives - size: 3 - 8" x 1"
x 1/8"
• Rabbeting capacity: 1/2"
• Max. width of cut: 8"
• Cutterhead speed: 5,500 RPM
• Cuts per minute: 16,500
• Approx. shipping weight: 495 lbs.
$ 999.00
#W1684
$ 1,395.00
Same as above but with Spiral
Cutterhead • #W1705
#D3166
#D3349
Set of 3 HSS 8” replacement knives . . . . . . . . . .$ 59.95
10-pack Repl carbide inserts for Spiral Cutterhead . .$ 36.50
Optional Accessories:
• 1 HP, 1 phase, 110V motor
• Table size: 7" x 47"
• Foot print: 18-1/4" x 15-1/2"
• Cutterhead diameter: 2-1/2"
• Knives - size: 3 - 6" x 1" x 1/8"
• Rabbeting capacity: 1/2"
• Maximum width of cut: 6"
• Cutterhead speed: 5,000 RPM
• Cuts per minute: 15,000
• Approx. shipping weight: 300 lbs.
Shop Fox 6” Jointer
Optional Accessories:
Magnetic Jointer Knife Setting Jigs
This knife setting system allows you
to get jointer knives in perfect
alignment every time. It also allows
you to shift nicked knives to get a
perfect cut to an accuracy of ±
.001" . For 4" to 8" jointers with
HSS knives.
$ 49.95
$ 29.95
#W1211
#W1210
Steel body jig . . . . . . . . . . . . . . . . . . . . .
Polycarbonate body jig . . . . . . . . . . . . . . .
Push Blocks
Our push blocks are constructed of
high-impact molded plastic with nat-
ural rubber friction pads that grip the
workpiece firmly. Woodworkers can
work with confidence knowing that
these blocks are between their fingers and
the cutting tool. Bright, safety-orange
color makes them easy to find and
reminds woodworkers that safety comes first!
#W1400
#W1401
$ 4.95
$ 7.95
Standard push block . . . . . . . . . . . . . . . . . . .
Large push block . . . . . . . . . . . . . . . . . . . . .
$ 14.95
$ 20.50
#D1057
#D1058
1” travel x .001” indicator. . . . . . . . . . . . .
Magnetic base . . . . . . . . . . . . . . . . . . . . . .
Dial Indicator and
Magnetic Base
Dial indicators are a necessity in any shop -
woodworking and metalworking alike. Use them
with magnetic bases for measuring runout, set-
ting up tool and checking alignment. Magnetic
base has a very strong magnet that is easily
activated with a convenient switch. Mounts at
any angle and has a fine adjustment arm.
Knife Hone & Guide
With this handy sharpener, you will be able to
hone your jointer and planer knives to razor sharp-
ness without removing them from the machine!
Great for quick touch-ups and extends the period
between major re-sharpening.
#D1123
$ 8.95
Magnetic Featherboard
Powerful magnets hold the Grip-Tite guide solid
to any cast iron or steel tabletop. As a board is
pushed between the Grip-Tite guide and the
fence, flexible polycarbonate feather blades
force the board down and against the fence.
Narrow boards can be cut, shaped, or jointed
without putting your hands near the blade.
#GRIP-TITE
$ 38.95
$ 599.00
#W1679
#D3165
$ 49.95
Set of 3 HSS 6” replacement knives . . . . . . . .
$ 239.00
#W1694
Shop Fox 6” Benchtop Jointer
• 12 amp, 1 phase,
110V motor
• 2 knife cutterhead
• Table length: 28-1/2”
• Cutterhead speed:
10,000 RPM
• Cuts per minute:
20,000
• Weight: 95 lbs.
Optional Accessories:
#D3319
$ 24.95
Set of 2 HSS 6” replacement knives . . . .