Specifications

22
Shapers • Scroll Saw
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
$ 1,099.00
#W1702
Shop Fox 3 HP Shaper
• 3 HP, 1 phase, 220V motor
• Reversing
• 2 spindle speeds: 7,000 &
10,000 RPM
• 1/2”, 3/4” & 1” interchangeable
spindles
• 3” spindle travel
• 30-1/2” x 28-1/4” table
• Miter slot
• 3” dust chute outlet
• Includes miter gauge
• Weight: 353 lbs.
Shop Fox 2 HP Shaper
• 2 HP, 1 phase, 110/220V motor
• Reversing
• Two spindle speeds: 7,000 & 10,000 RPM
• Spindles: 1/2" and 3/4" (Included)
• Spindle Travel: 3"
• Table Size: 24" Wide x 21" Deep
• 3” dust chute outlet
• Heavy-Duty Miter Gauge
• Weight: 293 lbs.
$ 680.00
#W1674
Shown with D2057
Adjustable Mobile Base.
(Not Included)
#D3124
#D3080
23” x 40” Extension table . . . . . . . . . . . . . . . . .$ 159.95
1/4” & 1/2” Router bit spindle . . . . . . . . . . . . . . .$ 49.95
Optional Accessories:
$ 345.00
#W1701
Shop Fox 1 HP Shaper
• 1 HP, 1 phase, 110V motor
• 14,000 RPM
• 1/2” spindle
• 3/4” spindle travel
• 24-1/4” x 19” table
• Miter slot
• Includes 1/4” and 1/2” router bit
adapters & miter gauge
• Weight: 195 lbs.
These Board Buddies
are made from die-
cast aluminum and
feature non-marring
green neoprene rubber
wheels. Because the
wheels turn in both
directions, they func-
tion as hold-downs
rather than anti-kick-
back devices. Mounts to fences 3” to 3-1/2” high x 1” or
wider. Use optional mounting tracks for mobility along fence.
Hold-Down Device
#W1105
#W1107
#W1108
$ 36.95
$ 11.95
$ 18.95
Hold-down device . . . . . . . . . . . . . . .
12” optional mounting track . . . . . . . .
24” optional mounting track . . . . . . .
Right Angle Jig
This amazingly affordable jig is
constructed using top quality
aluminum castings and plates
which are machined to exact-
ing tolerances. Cut tenons,
dados, rail ends, and finger
joints safely and with complete accuracy.
#W1500
$ 169.95
Right Angle Jig . . . . . . . . . . . . . . . . . .
#43-188
$ 125.95
Sliding Shaper Jig . . . . . . . . . . . . . . .
#W1301
$ 12.95
Optional (shown) 6” vise clamps . . . . . .
Delta Sliding Shaper Jig
Provides greater accuracy during a
variety of shaping operations.
Features 3 guide bar locations for
positioning the workpiece as close
as possible to both large and small
diameter shaper cutters. Fits standard 3/8” X
3/4” miter gage grooves.
$ 150.00
#W1713
Shop Fox 16”VS Scroll Saw
• 1/8 HP, 1 phase, 110V motor
• Variable speed: 550 to
1,700 strokes per minute
• 16” throat capacity
• 2” maximum working
thickness
• 3/4” stroke length
• Tilting table
• Includes gooseneck
work light, dust blower
and dust port
• Weight: 31 lbs.
* Call for our selection of blades for this machine