Specifications

- 2 -

 Specifications

Power input 24 VDC, isolated switching power supply

Voltage range 90 to 110% rated voltage

Power consumption Max. 10 W + 3 W × number of DTC2000 controllers connected in parallel (Max. 7)

Thermocouple: K, J, T, E, N, R, S, B, L, U, TXK

Input sensor

Platinum resistance: Pt100, JPt100, Cu50

Sampling cycle Thermocouple or platinum resistance: 1.0 second/all input

Control method PID, PID programmable, manual, ON/OFF

Relay output: SPST, Max. 250 VAC load, 3 A resistive load

Voltage pulse output: 12 VDC, Max. 40 mA current output

Current output: DC 4 to 20 mA output (resistive load < 500Ω); for OUT1 and OUT2 only

Output accessories

(optional)

Analog voltage output: 0 to 10V (resistive load > 1,000Ω); for OUT1 and OUT2 only

Output functions

Control output, alarm output or proportional output (proportional output is only applicable in the model with

linear voltage and current output for OUT1, OUT2)

Alarm modes 13 alarm modes available

Communication RS-485 digital communication; supports baudrate 2,400 to 115,200bps

Communication protocol Supports Modbus ASCII/RTU

Extension port The extension port transmits 24V power supply and communication signals to extension module DTC2000.

Vibration resistance 10 to 55Hz 10m/s

3 axes 10mins

Shock resistance Max. 300m/s

3 axes 6 directions, 3 times each

Ambient temperature 0 to +50°C

Storage temperature -20 to +65°C

Operation altitude < 2,000m

Ambient humidity 35 to 85% RH (non-condensing)

Pollution degree 2

 Product Profile & Outline

DTE10T

1 I/O terminals

2 Status LED

3 Display and setup unit

4 DIN rail clip

5 Power input port

6 RS-485 communication port

7 Extension module fixing clip

8 Extension port

 Panel Layout!