Specifications

- 11 -
 Communication Parameter Setting
Content 0 1 2 3 4 5 6
Baudrate 2,400bps 4,800bps 9,600bps 19,200bps 38,400bps 57,600bps 115,200bps
Parity bit None (N) Even (E) Odd (O)
Table 4
 Error Codes
The error codes can be read from address H1000 ~ H1007. When the input operation is in normal status, H1000 ~ H1007 are for input values.
When input error occurs (except for stable status and input exceeding the range), DTE will read error codes in H8001 ~ H8002.
H1000 Error description
H8001 EEPROM cannot be written in.
H8002 Input sensor is not connected.
H8003 Group INB is not connected.
Table 5
Analog output current tuning scale: 1μA/scale
Analog output voltage tuning scale: 1mV/scale
Returning to Default Value: Write H1234 into address H10F1 and H1357 into address H10F2. Restart DTE.
 Programmable Communication Parameter Setting
INA INB
Content Explanation CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Read remaining time of the step Unit: sec H111E H121E H131E H141E H151E H161E H171E H181E
Read remaining time of the step Unit: min H111F H121F H131F H141F H151F H161F H171F H181F
Read the NO. of the current
pattern
0 ~ 7 H1120 H1220 H1320 H1420 H1520 H1620 H1720 H1820
Read the NO. of the current step 0 ~ 7 H1121 H1221 H1321 H1421 H1521 H1621 H1721 H1821
NO. of start pattern 0 ~ 7 H1122 H1222 H1322 H1422 H1522 H1622 H1722 H1822
NO. of start step 0 ~ 7 H1123 H1223 H1323 H1423 H1523 H1623 H1723 H1823
 Programmable Parameter Setting
Content Explanation Pattern 0 Pattern 1 Pattern 2 Pattern 3 Pattern 4 Pattern 5 Pattern 6 Pattern 7
Max. number of
steps in the pattern
0 ~ 7 = N: The pattern
executes from step 0 to
N.
H2068 H2069 H206A H206B H206C H206D H206E H206F
Number of cycles of
pattern 0 ~ 7
execution
0 ~ 199: The pattern has
been executed for 1 ~
200 times
H2070 H2071 H2072 H2073 H2074 H2075 H2076 H2077
NO. of current link
pattern
0 ~ 8: 8 refers to end of
program; 0 ~ 7 refer to
the NO. of next pattern
H2078 H2079 H207A H207B H207C H207D H207E H207F
Address Default Content Explanation
2000H ~ 203FH 0
Target temperatures for pattern 0 ~ 7
Pattern 0: 2000H ~ 2007H
Unit: 0.1°C
2080H ~ 20BFH 0
Execution time for pattern 0 ~ 7
Pattern 0: 2080H ~ 2087H
Time: 0 ~ 900 (Unit: 1 min)
4. Communication format: H03 = read bit data; H06 = write bit data