Installation Sheet

ManualsBrandsDelta ManualsBathroom Remodel & Bathroom FixturesOther Core Widespread Vertical Bidet Faucet Less Handles

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

•To READ ALL the instructions completely

before beginning.

•To READ ALL warnings, care, and maintenance

information.

• To purchase the correct water supply hook-up.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de

débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Acheter le bon nécessaire de raccordement.

Models/Modelos/Modèles

44 Series/Serias/Seria

34664 34664 34664 34664 34664 34664

11/15/08 Rev. C

SILICONE

3/32" (2.38mm)

3/32 po (2.38mm)

THREE HANDLE ROSETTE BIDET

VALVE WITH VACUUM BREAKER

AND POP-UP ASSEMBLY

VÁLVULA DE TRES MANIJAS PARA EL

BIDÉ DE BOQUILLA ROCIADORA CON

ROMPEDOR DE VACÍO Y ENSAMBLE

DEL DESAGÜE AUTOMÁTICO

ROBINET À TROIS POIGNÉES POUR

BIDET AVEC AJUTAGE, CASSE-VIDE

ET RENVOI MÉCANIQUE

ASME A112.18.1 / CSA B125.1

Summary of content (8 pages)

PAGE 1
® UP C ® ASME A112.18.1 / CSA B125.1 34664 34664 34664 Models/Modelos/Modèles 44 Series/Serias/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. 34664 34664 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up.
PAGE 2
CLEANING AND CARE WARNING: Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. Scrubbing Bubbles ® Bathroom Cleaner and Lysol ® Basin Tub and Tile Cleaner must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles.
PAGE 3
▲Specify Finish/Especifíque el Acabado/Précisez le Fini 7 RP10092▲ Base w/ Gasket Base con Empaque Base avec Joint 1 RP10093 Directional Valve Assy. Ensamble de la Válvula Direccional Dérivation 6 RP14273▲ End Valve Assy.
PAGE 4
RP18429▲ RP18373▲ RP5885 RP5885 H11▲ 1 H21▲ A. 6" Min. 6 po Min. RP26865 RP20185 A22▲ H22▲ RP26865 RP26865 RP20185 RP20185 H17▲ INSTALLATION INSTRUCTIONS (Refer to page 3) H27▲ SHUT OFF WATER SUPPLIES 1. Remove upper cone washer from directional valve assembly (1), and place assembly in bidet from bottom. Replace cone washer. Place gasket, then base, (2) on directional valve and tighten base until flush with top of threaded shoulder. Tighten bottom nut. Install handle. 2.
PAGE 5
A. 2 C. B. E. D. SIL NE I CO 1 1 2 3 2 3 2 1 1 1 G. F. 4 2 2 H. 5 1 3 2 1 6 1 5 2 3 4 2 METAL POP-UP A. Remove stopper (1) and flange (2). D. Apply silicone to underside of flange (1). Insert G. Remove pivot nut (1). Install horizontal rod B. Screw nut (1) all the way down. Push washer E. Pivot (1) must face faucet. Pull assembly (2) down firmly and hold in place. DO NOT TWIST. H. Install rod guide assembly (1). Attach (2) and gasket (3) down. ® C.
PAGE 6
3 4 1/2" (12.70mm) IPS 1/2 po (12.70mm) IPS 1 2 1 3 MAKE CONNECTIONS TO WATER LINES: INSTALL HANDLES: Note: Be careful when bending the copper tubing. Kinked tubes will void the warranty. If you are installing cross or lever handles, be sure to install the retention screws (1) into the stems prior to installing the handles. Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing), or (2) 1/2" I.P.S. faucet connector.
PAGE 7
5 OPERATING INSTRUCTIONS FLUSH YOUR SYSTEM 1. Check to be sure the diverter valve (center handle) is in the rim feed position (turned fully clockwise). 2. Turn on hot and cold water valves and adjust for desired temperature. 3. To divert water to the rosette spray, slowly turn diverter valve (center handle) counter-clockwise. 4. To fill bowl, pull up on pop-up knob. After connections have been made, turn diverter valve (center handle) clockwise to the rim feed position.
PAGE 8
3 2 2 1 1 MAINTENANCE If Bidet exhibits very low flow: SHUT OFF WATER SUPPLIES. Clean Seats and Springs (1) of any debris.* Bidet leaks from Rosette Spray: SHUT OFF WATER SUPPLIES. Replace Seats & Springs (1).* If leak persists: SHUT OFF WATER SUPPLIES. Replace Stem Unit Assembly (2).* *Install stems (2) and 1/4 turn stops (3) correctly for proper handle rotation. Note: Not all models require 1/4 turn stop. MANTENIMIENTO La Bide tiene fugas de agua en la salida: CIERRE LOS SUMINISTROS DE AGUA.