User Manual

v1.0.3
8
1.6.3 Installer-supplied components
Installers may prepare the following parts:
1. Conduit of appropriate size or cable gland (M32) for input power wires to ensure the water resistance.
2. DIN 46228-4 Cord end terminal:
Please use the cord end terminal for split conductors while installation.
Current 16 A 32 A
Pin length 18 mm 18 mm
Wire range
4
mm

10
mm

3. Upstream breakers:
To reduce the risk of fire, only connect to a circuit with circuit breaker conforming to IEC 60898-1.
Model Circuit breaker specification
EIAW-E7K 40A min., 230V min., 2 poles, Type B
EIAW-E11K 20A min., 400V min., 4 poles, Type B
EIAW-E22K 40A min., 400V min., 4 poles, Type B
1.6.4 Overview of components
1. Mounting bracket
2. Key switch
3. Body
4. LED bar
5. Cable gland
6. Middle cover
7-A. Vehicle connector
7-B. Socket/ socket with shutter
8. Front cover
9. Water proof cap