User Manual

v1.0.3
19
2.2.6.1 Pin definition
User can connect the external component with signal cable based on following configuration. The output power
will be adjusted by the following pin definition once the grid power is limited by network operator. The power
limitation is based on rated output power configured by dip switches (2.2.4.4).
2.2.6.1.1 Configuration A
Connect the signal cable with Pin 1 and Pin 5 as below:
Pin 2 Pin 3 Pin 4 Pin 5 Power limitation
Low Low Low Low Output 100% power
Low Low Low High Stop charging
2.2.6.1.2 Configuration B
Connect the signal cable with Pin 1 to Pin 5 as below: