Specification Sheet

Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Measurements may vary ± 6mm (0.25")
Page 5.C.2 DSP–87TLH
APPROVALS:
• CSA certified
• Complies to ASME A112.18.1/CSA B125.1
• Indicates compliance to
ICC/ANSI A117.1
• Verified compliant with 0.25% weighted
average Pb content regulations
( Contact Delta Representative for State and/or
Local Approvals.)
FLOW RATE vs PRESSURE
0.35 gpm (1.32 L/min) Outlet
0.5 gpm (1.9 L/min) Outlet
FLOW
(L/min.)
FLOW
(GPM)
2.5
2.0
1.5
1.0
0.5
0
0
1
2
3
4
5
6
7
8
9
01020304050607080
Spout Outlets
Line Pressure (psig)
87T105 – 87T911 – LOCKING PINS
87T151
155 mm
(6.1")
DRILL 5mm OR 3/16” DIA. HOLE
FOR THE TWO LOCKING PINS.
18 mm
(0.7")
36 mm
(1.4")
137 mm
(5.4")
73 mm
(2.87")
2 mm
(0.09")
68 mm
(2.69")
23°
25 mm
(1.0") DIA.
155 mm
(6.1")
3 mm
(0.12") MIN.
63 mm
(2.5") MAX.
92 mm
(3.63")
49 mm
(1.91")
44 mm
(1.75")
64 mm
(2.53")
76 mm
(3.0")
INLETS - 1/2" MIP/Coupling Nuts
87T111 & 87T911
Lever Handle Metering Handwash Faucet
TECK
®
COMMERCIAL
DSP–87TLH Rev. B