Specification

MATERIALS: Robe Hook - Zinc die cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied fasteners. Slip
product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER
INFORMATION: Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the
following fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall
- Toggle Bolts.
SPECIFICATION: Surface mounted double robe hook shall be model _____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
Trinsic
®
ROBE HOOK
2-1/4"
[57 mm]
3"
[77.2 mm]
2-5/6”
[72.1 mm]
1-1/3"
[34 mm]
™