Specification

Dryden
™
MATERIALS: Posts - Zinc Die Cast
18" & 24" Bars - Brass Tubing
Wall Plates - Zinc Die Cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel bar shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
18 in. & 24 in. TOWEL BAR
TECHNICAL DATA
Dryden
™
MATERIALS: Post - Zinc Die Cast
Hook - Zinc Die Cast
Wall Plate - Zinc Die Cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted double robe hook shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
DOUBLE ROBE HOOK
(654.1 mm)
(610 mm)
(501.6 mm)
(457 mm)
(610 mm)(457 mm)
25-3/4"
24"
24"
19-3/4"
DIM "B"
18"DIM "A"
18"LENGTH
[117.5mm]
4-5/8"
[125.4mm]
4-15/16"
[44.5mm]
1-3/4"
[79.4mm]
3-1/8
A
B
[79.4mm]
3-1/8
[44.5mm]
1-3/4
[17.5mm]
11/16
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com ©2009 LHMC, A Masco Company