Specification Sheet

®
®
U
P
C
COMPLIES WITH:
• ASME A112.18.1-2000
• CSA B125-98
Indicates ADA compliance to
ICC/ANSI A117.1-1998
• IAPMO Listed
•
CSA Certified
SPECIALTY
FAUCETS
■ Single Handle Shampoo Valve
■ Single Hole Sink Applications
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
•
Single handle shampoo valve for exposed
mounting on single hole sinks.
• Solid fabricated brass body.
• 3/8" O.D. copper tube inlets.
• Control mechanism shall be of the rotating
stainless steel ball type with replaceable
non-metallic seats operating in stainless steel
lined sockets.
• Lever handle shall return to neutral position
when valve is turned off.
• All operating parts shall be replaceable from
the top.
•
Includes 2 3/8" (60 mm) diameter and 2 3/4"
(70 mm) by 5 7/8" (149 mm) escutcheons.
•
1/4"-18 NPSM male threaded nipple for spray
attachment.
562
560
560
562
0
1
2
3
4
5
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
560
562
3 1/8"
(79 mm)
4 1/8"
(105 mm)
2 3/8"
(60 mm)
2 7/8"
(73 mm)
5 7/8"
(149 mm)
3 1/4"
(83 mm)
2 7/8"
(73 mm)
2" (51 mm)
Min. Hole
Required
3/8" Dia. Tubes
10 1/2" (267 mm) Long
1 1/8"
(29 mm)
Max. Deck
Thickness
1 1/8"
(29 mm)
Max. Deck
Thickness
2 3/4"
(70 mm)
2" (51 mm)
Min. Hole
Required
3/8" Dia. Tubes
10 1/2" (267 mm) Long
5 7/8"
(149 mm)
1/4"-18 NPSM
1/4"-18 NPSM
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
8.D.2