Specification
Submitted Model No.:
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue 
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or 
www.deltafaucet.com for nish options and product availability.
DSP-B-51599 Rev. D
Specic Features:
 24 5/8"
(625.5 mm)
 6 1/2"
(165 mm)
 70" (1778 mm) for 51599
 60" - 82"(1524 mm-2083 mm) 
 for 51599-DS
Full Body       
 Spray
Soft Drenching 
 Spray
 Shampoo 
Rinse Spray
Fast
Massage
51599
▲
51599-
▲DS
 2 13/16"
(71 mm)
 3 5/8"
(91 mm)
 2 7/16"
(61 mm)
 9 13/16"
(249 mm)
 19 9/16"
(498 mm)
 22 3/4"
(578 mm)
 Full Spray
w/ Massage
▲ Designate proper nish sufx
FEATURES: 
• Touch-Clean
®
 Nozzles
STANDARD SPECIFICATIONS
• Max flow rate 1.75 gpm @ 80 psi, 6.6 L/min @ 550 kPa
• Hand held shower with ive spray patterns -- pause is a 
 non-positive shut-off
• Wall bar w/adjustable slide (allows
for adjustable shower 
height). Not to be used as a grab bar. 
• 70" (1778 mm) Ultra Flex hose for 51599
• 60"- 82" (1524 mm-2083 mm) metal stretchable hose 
 w/vacuum breaker for 51599-DS
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
WARRANTY
• 
Parts  and  Finish  -  Lifetime  limited  warranty;  or  for  
 commercial purchasers, 10 years for multi-family       
 residential (apartments and condominiums) and      
 5 years for all other commercial uses, in each case     
 from the date of purchase.
• 
Electronic Parts and Batteries (if applicable) - 5 
 years from the date of purchase; or for commercial     
 purchasers, 1 year from the date of purchase. No      
 warranty is provided on batteries.
WALL BAR HAND 
HELD SHOWER
■ 5-Spray Setting Wall Bar Hand Shower
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1 u
• ASME A112.18.3
• EPA WaterSense
® 
HAND SHOWER
DOUCHE À MAIN
REGADERA DE MANO
Your Delta Faucet hand shower incorporates a 
backflow protection system that has been tested 
to be in compliance with ASME A112.18.3 and 
ASME A112.18.1/CSA B125.1. It incorporates 
two certified check valves in series, which 
operate independently and are integral, 
non-serviceable parts of the wand assembly. 
u

