Specification

■ 4-Spray Settings Palm
®
Hand Shower
Submitted Model No.:
Specific Features:
SLIDE BAR / GRAB BAR
HAND HELD SHOWERS
51400▲
STANDARD SPECIFICATIONS:
• Max flow rate 1.75 gpm @ 80 psi, 6.6L/min @ 550 kPa
• 60"-82" Stretchable metal hose
• Change spray modes with push button
• Dual check valves for back low prevention
• 24" Contemporary slide bar / grab bar
• Hand held shower with four spray setting - pause is a
non-positive shut-off
• ADA compliant adjustable mount, hand shower
and hose
• ADA compliant grab bar when installed per accessibility
guidelines of the act
COMPLIES WITH
• ASME A112.18.1/CSA B125.1 u
• ASME A112.18.3
• EPA WaterSense
®
Indicates compliance to
ICC / ANSI A117.1
Delta reserves the right (1) to make changes in specications and materials, and (2) to change
or discontinue models, both without notice or obligation. Dimensions are for reference only. See
current full-line price book or www.deltafaucet.com for nish options and product availability.
4 11/16"
(119 mm)
4 1/8"
(105 mm)
11/16"
(42 mm)
24"
(610 mm)
27 1/2"
(699 mm)
3 1/2"
(89 mm)
4 1/4"
(108 mm)
60"-82"
(1524-2083mm)
Stretchable
Metal Hose
Full Sprary
Fast
Massage
Full Spray
w/ Massage
Pause
DSP-B-51400 Rev. E
FEATURES:
• Touch-Clean
®
Nozzles
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
▲ Designate proper nish sufx
WARRANTY
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
• Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
HAND SHOWER
DOUCHE À MAIN
REGADERA DE MANO
Your Delta Faucet hand shower incorporates a
backflow protection system that has been tested
to be in compliance with ASME A112.18.3 and
ASME A112.18.1/CSA B125.1. It incorporates
two certified check valves in series, which
operate independently and are integral,
non-serviceable parts of the wand assembly.
u