Installation Sheet

Public Washroom

TECHNICAL DATA

MATERIALS: Paper holder posts are die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86. Die casts

are highly polished and chrome plated. Wall plates are 19 gauge zinc plated steel and are installed on 1/8" thick polished

aluminum plate with rivets. Roller material as listed under each model number. All rollers are spring actuated.

INSTALLATION: Mount pre-assembled double roll paper holder with 2 - #9 x 3/4" flat head zinc plated steel screws provided.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are

suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted twin paper holder shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

Twin Paper Holder -

45270 & 45272

5-1/2"

140 mm

3-3/8"

85.7 mm

13-1/2"

343 mm

51 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

CP4772