Installation Guide

7
Attachmagneticdoorgaskettodoor.Makesurethatthebottom
ofthemagneticgasketoverlapsthesweepgasket.
NOTE:Thebottomofthemagneticgasketshouldtouchtheglass
supportwhenthedoorisclosed.
Attachdoorsweeptobottomofglassdoor.Makesurethattheends
ofthegasketareflushwiththeglass.
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it may
shatter. Gaskets must always be used in between
glass and metal.
Attachagasketandtheinnerdoorhandletoglassdoor.Tightenset
screwsinhandletosecure.
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it may
shatter. Gaskets must always be used in between
glass and metal.
Attachouterdoorhandletoglassdoorusingagasketandtwo
screws.
1
2
3
16
15
1
14
2
1
13
2
B27795Rev.B