Technical Specifications

30-Inch (762mm) T-Square
Fence and Rail System
36-T30 T3
Specifications
Features
 RH RIP Capacity – 30-Inch (762mm) Max rip to right of blade
 LH RIP Capacity - 13-1/2 Inch (343mm) Max rip to left of blade
 Fence Height – 2-1/2 Inch (64mm)
 Fence Length – 35 Inch – (889mm)
 Rail Length – 62-1/2 Inch (1,587mm)
• One piece square tubular rail
• Mounting design attaches to Delta® table saws
including Contractor Saw®, Hybrid Saw®, and Unisaw®
models
• Extruded aluminum faces attach to steel tubing for
years of continuous use
• Three-point locking system with twin hairline pointers to
assure fence is parallel to blade and accurate to within
1/64 of an inch (0.4mm)
• Precision adjustments to square and level fence
• Easy-gliding, steel tube fence body to handle quick,
precision ripping, and square cuts
• Fence securely clamps to front tube and hooks over
rear rail to allow for fence attachments
• Quick – removal fence can be located on either side of
the blade for consistent ripping capabilities on left or
right tilt saws.
• Tape located on both RH and LH side of blade