Technical data

--- 16 ---
1. Disassembly of the Armature Ass'y
(1) Remove the two Brush Caps [136] and the two Carbon Brushes
[135].
(2) Remove the four Tapping Screws (W/Washers) D5 x 25 [132] to
remove the Motor Housing [131] (including the Stator [129]).
(3) Remove the two Machine Screws M5 x 12 (W/Sp. Washers)
[119].
(4) Facing the mounting surface of the Motor Housing [131] to the
Arm [120] slightly downward, tap it with a plastic hammer and
pull out the Armature Ass'y [123] and the Internal Wire Holder
[122].
2. Disassembly of the Stator
(1) Remove the two brush terminals of the Stator [129] from the
Brush Holder [134].
(2) Remove the two Tapping Screws M5 x 60 (W/Washers) [128]
fixing the Stator [129] and pull out the Stator [129] by gently
tapping the Arm [120] mounting surface of the Motor Housing
[131] with a plastic hammer.
Item
No.
Disassembly
spots
Disassembly procedure Necessary tools
5 Armature Ass'y
Stator
Spindle Ass'y
Fig. 16
Flat-blade
screwdriver
Phillips
screwdriver
112
113
114
111
115
116
117
118
119
120
121
122
127
128
124
123
126
125
129
130
131
132
133
134
135
136
Plastic hammer
Plastic hammer
Flat-blade
screwdriver
Phillips
screwdriver