Technical data

--- 14 ---
1. Remove the two Machine Screws (W/Washer) M5 x 14 [39] and
the Chip Deflector [40] (debris guard).
2. Remove the two Hex. Bolts (W/Washers) M10 x 35 [42] and the
Fence [44].
3. Turn the Handle Table Support [49] counterclockwise and remove
it. Remove the Hex. Bolt M10 x 65 [41].
4. Remove the Hex. Socket Set Screw M6 x 12 [52] which fixes the
Pivot Shaft [53] to the Table [60], then gently strike the Pivot Shaft
[53] from the Table [60] side by using a plastic hammer and a
metal bar (5 mm dia.) to extract it. Then, the Angle Regulator [32]
can be removed.
Item
No.
Disassembly
spots
Disassembly procedure Necessary tools
3 Fence
Angle regulator
47
48
29
30
31
39
38
49
51
32
33
34
50
43
40
45
37
41
46
42
44
57
Fig. 14
Phillips
Screwdriver
21 mm wrench
3 mm Hex. bar
wrench
56
58
65
66
61
60
71
67
65
59
D5 Metal bar
plastic hammer
52
53
54
55
69
70
73
74
75
64
62
63
68
72
57