Technical data

--- 7 ---
CAUTION
For safe operation, see instruction manual.
Do not expose to rain or use in damp locations.
(1) Precautions on the Name Plate
Each Model C 10FC2 is furnished with a Name Plate that lists the following precautions.
Instruct the customer to thoroughly read the Instruction Manual prior to attempting to operate the machine.
(2) Waring Label (A)
The Warning Label (A) specified by the UL is affixed
on the upper righthand portion of the base. Please
instruct users to strictly observe the contents in 1 to 9
in the Warning Label (A) shown at left.
The Warning Label (B) is affixed on the front left side
of the blade guard (metal).
The link indicated here is removed at the time of
shipment from the factory. Please instruct users to
install the link as shown in the Warning Lavel (B) at
left to ensure smooth movement of the blade guard
(plastic) before putting the tool into use.
(3) Warning Lavel (B)
WARNING
For Your Own Safety Read Instruction
Manual Before Operating Miter Saw.
1. Wear eye protection.
2. Keep hands out of path of saw blade.
3. Do not operate saw without guards in place.
4. Do not perform any operation freehand.
5. Never reach around saw blade.
6. Turn off tool and wait for saw blade to stop
before moving workpiece or changing settings.
7. Disconnect power before changing blade or servicing.
8. Saw blade diameter is 10" (255 mm).
9. No load speed is 4900 rpm.
H393374
WARNING
Make sure that link is
securely placed before
operation.
Read instruction manual
carefully to place
the link.
H391362
Link
The Warning Label (C) is affixed on the rear face of the blade guard (metal).
Please instruct users to strictly observe the contents in 1 and 2 on the Warning Label (C).
(4) Warning Lavel (C)
WARNING
1. Only operate the tool after ensuring
the workpiece is fixed properly with
vise assembly.
H393377
2. Never remove guard (including link,
blade guard (metal), vlade guard
(plastic), plate and so on) from the tool
body when you operate it.