Specification Sheet

Cast Deckmount Sink Faucets
4" Centers
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP –27C/T4 & 5 Rev. B
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
GOOSENECK SPOUT ASSEMBLY #9
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4, 5, 6 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlet #7 152 6 117 4.6 152 6.0
GOOSENECK SPOUT ASSEMBLY #8
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R2) for outlets #2, 3, 4, 5, 6 114 4.5 104 4.1 170 6.7
Gooseneck–Standard (R2) for outlet #7 114 4.5 97 3.8 178 7.0
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Lever Handle No. 2, 3, 4, and 5 ADA
Compliant and meets Handicapped
Accessibility Standard ASME A117.1
of less than 5 lbs. operating force.
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
SWING SPOUTS
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(l/min.)
FLOW
(USGPM)
Spout Outlets
No. 3 & 4 Aerator
No. 2 Laminar Flow Outlet
No. 7 Flow Control
No. 5 Low Flow Outlet
Outlet Flowrates
TECK
89mm
(3.5")
102mm
(4.0")
117mm
(4.6")
102mm
(4.0")
156mm
(6.13")
25mm
(1.0") MIN.
2 HOLES
44mm
(1.75") MAX.
DECK THICKNESS
Spout “A” “C” “L”
No. SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
3 6" Tubular Spout (S3) 140 5.5 38 1.5 107 4.2
See Page 9.C.2 for additional optional spouts.See Page 9.C.1 for additional optional spouts.
SWING SPOUT ASSEMBLIES
DECK FAUCET
Outlets #2, 3, 4, 5, 6 Outlet #7
METAL POP-UP
(supplied with 27C5)
35mm
(1.375")
Dia.
86mm
(3.375")
118mm
(4.625")
42mm (1.625")
to
61mm (2.375")
32mm
(1.25")
Dia.
54mm
(2.125")
Dia.
SIDE VIEW
with Pop-Up
28mm
(1.1")
42mm
(1.67")
51mm
(2.0")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
C
87mm
(3.4")
1
4
97mm
(3.8")
102mm
(4.0")
96mm
(3.77")
2
76mm
(3.0")
76mm
(3.0")
3
OUTLET “D”
NO. mm in.
2 18 0.69
3 18 0.69
4 17 0.67
5 18 0.69
6 17 0.67
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER
OR 1/2-14 NPSM COUPLING NUT (SUPPLIED)
LIMITED SWING GOOSENECK
Add suffix “- LS” to Product
Number for 120º Limited Swing
INLETS - 1/2'' MIP/Coupling Nuts
Note: Measurements may vary ± 6mm (0.25'')
GOOSENECK SPOUTS
141mm
(5.5")
135mm
(5.3")
152mm
(6.0")
5
HANDLE TEMPERATURE
INDICATORS
■ Add suffix “-TI” to Product Number
for handle temperature indicators
“H” (red), “C” (blue).
Availaible on handle options 2, 3
or 4 only.