Specification

Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 3.C.18 DSP –27T45 Rev. C
Cast Deckmount Sink Faucets
4" Centers
Approvals:
• CSA certified
• Complies to ASME A112.18.1/CSA B125.1
•
Handles No. 2, 3, 4, and 5 meet ADA
compliance to ICC/ANSI A117.1/ADA
• Verified compliant with 0.25% weighted
average Pb content regulations
( Contact Delta Representative for State and/or
Local Approvals.)
SWING SPOUTS
FLOW RATE vs PRESSURE
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(GPM)
Spout Outlets
No. 2 Laminar Flow Outlet
No. 7 Flow Control
No. 3 & 4 Aerator
No. 5 Low Flow Outlet
Outlet Flow Rates
TECK
89mm
(3.5")
102mm
(4.0")
117mm
(4.6")
102mm
(4.0")
156mm
(6.13")
25mm
(1.0") MIN.
2 HOLES
44mm
(1.75") MAX.
DECK THICKNESS
DECK FAUCET
Outlets #2, 3, 4, 5, 6 Outlet #7
METAL POP-UP
(supplied with 27C5)
RP27575 Pop-Up
111mm
(4.375")
104.7mm
(4.125")
35mm
(1.375")
Dia.
42mm (1.625")
to
79.3mm (3.125")
54mm
(2.125")
Dia.
32mm
(1.25")
Dia.
RP5651 Pop-Up
86mm
(3.375")
118mm
(4.625")
42mm (1.625")
to
61mm (2.375")
32mm
(1.25")
Dia.
35mm
(1.375")
Dia.
22T
54mm
(2.125")
Dia.
SIDE VIEW
with Pop-Up
28mm
(1.1")
42mm
(1.67")
51mm
(2.0")
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
87mm
(3.4")
1
4
97mm
(3.8")
102mm
(4.0")
96mm
(3.77")
2
76mm
(3.0")
76mm
(3.0")
3
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER
OR 1/2-14 NPSM COUPLING NUT (SUPPLIED)
GOOSENECK SPOUTS
141mm
(5.5")
135mm
(5.3")
152mm
(6.0")
5
HANDLE TEMPERATURE
INDICATORS
Add suffix “-TI” to Product Number for
handle temperature indicators “H” (red),
“C” (blue).
Availaible on handle options 2, 3 or 4 only.
OUTLET “D”
NO.
mm in.
2 18 0.69
3 18 0.69
4 17 0.67
5 18 0.69
6 17 0.67
GOOSENECK SPOUT ASSEMBLY #8
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R2) for outlets #2, 3, 4, 5, 6 114 4.5 104 4.1 170 6.7
Gooseneck–Standard (R2) for outlet #7 114 4.5 97 3.8 178 7.0
GOOSENECK SPOUT ASSEMBLY #9
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4, 5, 6 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlet #7 152 6 117 4.6 152 6.0
SWING SPOUT ASSEMBLIES
“A” “C” “L”
SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
3 6" Tubular Spout (S3) 140 5.5 38 1.5 107 4.2
SPOUT
NO.
Note: Measurements may vary ± 6mm (0.25")
INLETS - 1/2" MIP/Coupling Nuts
Add suffix “-LS” to Product Number for
120º Limited Swing
LIMITED SWING GOOSENECK
FOR OPTIONAL RIGID/SWIVEL
& LIMITED SWING SPOUTS
See DSP-R/S for detailed specification (Found in the
“Add-On Option” section when using the printed spec binder)
FOR OPTIONAL SWING SPOUTS
See DSP-S/S for detailed specification (Found in the
“Add-On Option” section when using the printed spec binder)
DSP –27T45 Rev. C