Measurement Guide

Delta Shower Door
Measurement Guide
Choosing the right Shower Door is as easy as 1-2-3.
But before you customize your dream door, you need
to make sure you have the correct measurements.
• Identify Vertical and Horizontal Openings
Height (A) and Widths (B).
• Vertical Opening
Measure from the top of the tub apron or the top
of the threshold up to the top of the acrylic (or tile)
surround wall.
• Horizontal Opening
Measure width of opening at the top and the
bottom of the enclosure.
Need Additional Assistance with Delta Shower Doors?
Call us at 1.800.964.4850
Visit us at www.deltashowerdoors.com
Email us at [e-mail]
©2016 LHMC, A Masco Company
**Disclaimers
• For ceramic tile application, use the top of the tile
for the maximum door height.
• In older homes the opening at the top is often wider
than the bottom due to an out-of-plumb condition.
• NOTE: All Delta Shower Doors are designed to
accommodate out-of-plumb conditions totaling 3/8”.
RECORD DIMENSIONS BELOW
Opening
Height (A):
Width of
widest point (B):
A
B
B
Pivoting Shower Doors
A
B
B
Sliding Tub Doors