Specification Sheet

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–SHWB Rev. J Page 2.C.23
Shower Accessories
Specification: (example)
Handshower head with push button pause.
Back flow
protection provided by two integral certified
check valves in series, which operate independently
and are non-serviceable, ASME A112.18.3 and
ASME A112.18.1 / CSA B125.1.
o 59462-WHB-PK
• Shower MAX flow 2.5 gpm @ 80 psi
(9.48 L/min @ 552 kPa)
• Shower MIN flow 1.7 gpm @ 45 psi
(6.44 L/min @ 310 kPa)
• See Notes 1 & 2
o 59462-WHB20-PK
• Shower MAX flow 2.0 gpm @ 80 psi
(7.6 L/min @ 552 kPa)
• Shower MIN flow 1.7 gpm @ 45 psi
(6.44 L/min @ 310 kPa)
• See Notes 1 & 2
o 59462-WHB15-BG
• Shower MAX flow 1.5 gpm @ 80 psi
(5.7 L/min @ 552 kPa)
• Shower MIN flow 1.28 gpm @ 45 psi
(4.8 L/min @ 310 kPa)
• See Notes 1 & 2
Note 1
Showerheads/handshowers are for use with automatic compensating valves rated at or less
than the Shower MIN flow rate value.
Note 2
PAUSE WARNING – FOR HANDSHOWER
Plumbing Codes require that showerheads and handshowers provide a small but continuous
flow of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain
circumstances pressure variations in the water line and/or changes in the position of the
shower temperature control handle while in “PAUSE” mode could result in dramatic changes
to the temperature of the water when the shower head or hand shower is returned to the
“ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position
and feel the water with your hand before resuming your shower to ensure the water flow is
not too hot or too cold.
DO NOT allow children or others who might not understand this warning to use the
“PAUSE” function.
®
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
DSP–SHWB Rev. J