User's Manual

UMAC Turbo CPU/Communications Board Hardware Manual
Pewin Pro Software Setup 26
PEWIN PRO SOFTWARE SETUP
First Time User (Register the Newly Installed Devices)
1. Once the driver is installed, it needs additional configuration by using the PmacSelect dialog. The
PmacSelect dialog is accessible by all programs created with PComm 32 Pro (via the PmacSelect()
function call). Launch the supplied Delta Tau application (Pewin 32 Pro, PMAC Test Pro, or any
application) from the program menu and display the PmacSelect dialog.
Product
Display the PmacSelect Dialog
Pewin 32 Pro
From the main menu item setup, go to Setup\General Setup and Options. Select the Default
Device tab. Click on the Select button.
Pcomm 32 Pro
Run the supplied PmacTest application. From the main menu, select
Configure\Communications. Also, the PmacSelect() function can be called from any
application that has been coded.
Ptalk DT Pro
Call the SelectDevice() method of Ptalk from the supplied or self-created programs.
2. From the device selection screen, select the device number to insert a device and click Insert.
Another window listing all configured devices will appear.
3. Select the device to configure and click OK.
4. Once a PMAC is listed in the Pmacselect window, it is registered and can accept communication. It is
recommended to test a device upon registering. At this time, a screen displays and this device is
ready for use in any application.