User's Manual

Turbo PMAC2 Eth Ultralite Manual

SOFTWARE SETUP

From the Setup drop-down menu, click on Force All Windows to Device Number.

Click the Insert button.

Select the communication port from the list. All the available Serial ports (COM1, COM2, …)

and Delta Tau USB products are present in the list.

If you’re trying to communicate through an Ethernet port and the IP address for the PMAC is

not in the list, click the New button:

Select the Ethernet (Eth) option and click OK.

Enter the IP address of the controller. The Default IP address for all Delta Tau Products is

192.6.94.5 . If you need to change this default address, you can do so by using

Configure

Ethernet 100BaseT software, which can be accessed from the PMAC Executive PRO 2 Suite /

Delta Tau Common folder under the Start menu.