User's Manual

Turbo PMAC2 Eth Ultralite Manual
HARDWARE SETUP
11
Profibus
J4
DB9 Female
12345
6789
Pin # Symbol Function
1 N.C.
2 +5VDC Positive Power Supply
3 RXD/TXD-P RS 485 Receive / Send Data –P
4 CNTR-P Control Counter TTL
5 DGND* Reference Ground *
6 +5VDC Positive Power Supply
7 N.C.
8 RXD/TXD-N RS 485 Receive / Send Data -N
9 N.C.
* E8 jumper should be in 1-2 position
CANopen
J4
DB9 Female
12345
6789
Pin # Symbol Function
1 N.C.
2 CAN_L CAN_L Bus line ISO 11898
3 CAN_GND CAN Ground
4 N.C.
5 N.C.
6 N.C.
7 CAN_H CAN_H Bus line ISO 11898
8 N.C.
9 N.C
DeviceNet
J4
DB9 Female
12345
6789
Pin # Symbol Function
1 V+ DeviceNet +24V Power Supply
2 CAN_H CAN High Signal
3 V- DeviceNet V- Reference Potential
4 N.C.
5 SHELL Shield*
6 CAN_H CAN High Signal
7 N.C.
8 N.C.
9 CAN_L CAN Low Signal
* E8 jumper should be in 2-3 position
CC-Link
J4
DB9 Female
12345
6789
Pin # Symbol Function
1 SLD CC-Link Shield
2 FG CC-Link Function Ground
3 DATA A CC-Link Data A
4
5 DG CC-Link Data Ground*
6 FG CC-Link Function Ground
7
8
9 DATA B CC-Link Data B
* E8 jumper should be in 2-3 position