User's Manual

Turbo PMAC PCI Lite
Software Setup 21
If the host computer baud rate does not match the Turbo PMAC’s baud rate, either the Turbo PMAC’s
baud rate must be changed through the bus communications port, or the Turbo PMAC must be re-
initialized by resetting or powering up with the E51 jumper ON. This forces the Turbo PMAC to the
default baud rate of 38,400.
Note:
To use the baud rate of 115,200, the CPU must be operating at an exact multiple of
30MHz (i.e., 30, 60, 90, 120, or 150MHz).