User's Manual

PMAC2 PCI Hardware Reference Manual
Base Board Jumper Descriptions 15
E111-118: Command Output Disable State
E Point and
Physical Layout
Location Description Default
E111
E112
E113
E114
E115
E116
E117
E118
C1 Jump pin 1 to 2 of E11n for digital
servo command output signals of
Channel n to tri-state when amplifier-
enable signal for Channel n is in
disable state.
Remove jumper for digital servo
command output signals of Channel n
to remain active (but typically with
zero command value) when amplifier-
enable signal for Channel n is in
disable state.
No jumper
installed